iPad 2 GSM Volume and Power Button Cable Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

韩语

上一步下一步

正翻译步骤 19

步骤 19

iPad 2 GSM Volume and Power Button Cable Replacement: 步骤 0 中的图像 1，3

iPad 2 GSM Volume and Power Button Cable Replacement: 步骤 0 中的图像 2，3

iPad 2 GSM Volume and Power Button Cable Replacement: 步骤 0 中的图像 3，3

To remove the upper component board you will be pulling gently on its cable while lifting it up enough to clear the battery, but not high enough to scrape against the rear case. Go slowly and carefully.
Insert the tip of a spudger under the upper component board to lift it slightly.
Pull the board up and out of the space between the battery and the rear case bezel.
Remove the upper component board.
On reassembly, you'll want to reconnect the GPS antenna cable at this point. Use tweezers and work carefully.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。