翻译步骤＃3 - Recognizing & Disconnecting Cable Connectors - iFixit

修复你的物品

维修的权力

商店

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

To disconnect flat connectors like this one, use a spudger to pry up each side. Then, lift the connector straight up from its socket.

To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.

Flat-Topped (Low Profile) Connectors

To disconnect flat connectors like this one, use a spudger to pry up each side. Then, lift the connector straight up from its socket.
To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.

在开源创作共享许可协议下，你的投稿已被许可。