跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 6

Step 6
In this step you will be transferring the smart cover magnets to the NEW front panel assembly. Use a pair of tweezers to carefully place the upper left smart cover magnet in place. Repeat the procedure with the bottom left smart cover magnet.
  • In this step you will be transferring the smart cover magnets to the NEW front panel assembly.

  • Use a pair of tweezers to carefully place the upper left smart cover magnet in place.

  • Repeat the procedure with the bottom left smart cover magnet.

  • If necessary, use the edge of a plastic opening tool to flatten the piece of tape adhered to the bottom left smart cover magnet.

在此步骤中,您将将smart cover 磁铁转移到新的前面板组件上去。

使用一对镊子小心地将左上方的smart cover磁铁放在适当位置

在左下方smart cover磁铁位置上重复上述步骤。

如有必要,使用塑料打开工具的边缘调整smart cover磁铁下的胶带使其变平。

在开源创作共享许可协议下,你的投稿已被许可