iPad Mini CDMA Front Panel Assembly Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

英语

荷兰语

上一步下一步

正翻译步骤 2

步骤 2

iPad Mini CDMA Front Panel Assembly Replacement, Front panel preparation: 步骤 0 中的图像 1，2

iPad Mini CDMA Front Panel Assembly Replacement, Front panel preparation: 步骤 0 中的图像 2，2

Front panel preparation

This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue.
If you're installing a new front panel assembly, it may need the following preparation:
Peel the large clear plastic liner off of the inside of the glass.
Peel any blue plastic backings covering the adhesive around the perimeter of the front panel assembly.
Once removed, the adhesive strips will be exposed. Don't remove these backings until you're ready to install the front panel assembly.
Don't remove any copper coverings from the outlined region, such as yellow kapton tape or black electrical tape.
Ensure the glass panel is free of fingerprints and grime before installing it on your device.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。