跳转到主内容

Het loskoppelen van de batterij

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南

英语
荷兰语

正翻译步骤 1

步骤 1
Battery Disconnection, Coating information: 步骤 0 中的图像 1,3 Battery Disconnection, Coating information: 步骤 0 中的图像 2,3 Battery Disconnection, Coating information: 步骤 0 中的图像 3,3
Coating information
  • The entire surface of the eReader's internals is covered in a thin, plastic-like waterproof coating. Keep the following in mind as you continue disassembly:

  • While this won't hurt your device, removing the coating compromises the device to potential water damage.

  • The coating is brittle and can flake into many small pieces. Heating the coating helps, but working with it is still a time-consuming process.

  • The ZIF connector locking tabs are coated in a gel that can jam the hinge and keep the locking tab from completely unlocking. Make sure the tabs are completely upright before disconnecting any cables.

  • Depending on your repair, you might have to remove the coating from ZIF connectors and their cables.

De gehele oppervlakte van de binnenkant van de eReader is bedekt met een dunne, plasticachtige, waterbestendige coating. Houd de volgende informatie in je achterhoofd bij het verder demonteren van je toestel:

Hoewel het verwijderen van de coating geen grote invloed heeft op je toestel, zal het de waterbestendigheid van je toestel wel aantasten.

De coating is vrij boos en kan in vele kleine stukjes uiteenvallen. Het verwarmen van de coating kan helpen om alles bij elkaar te houden, maar het zal nog steeds een tijdrovend proces zijn.

De vergrendelingen van de ZIF-contacten zijn ook bedekt met een soort gel die de vergrendeling in de weg kant zitten. Zorg dat de vergrendelingen volledig verticaal omhoog staan voordat je de kabels loskoppelt.

Afhankelijk van de reparatie die je doet, zul je de coating ook van bepaalde ZIF-aansluitingen en de respectievelijke kabels moeten verwijderen.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利