修复你的物品 社区 商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的43指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 22

步骤 22
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip. If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

如果需要的话，可以用一张塑料卡来切割底部粘合带的剩余部分

注意不要触碰电容器的引线或电源（用红色表示）的任何暴露的焊点

+[* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).
[* black] If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.
-[* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

在开源创作共享许可协议下，你的投稿已被许可。