跳转到主内容

Apple Watch Series 7 电池替换

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 14

步骤 14
Apple Watch Series 7 Battery Replacement, Remove the battery: 步骤 0 中的图像 1,1
Remove the battery
  • Remove the battery.

  • Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.

  • If you're reusing your old battery, you can reuse the existing adhesive to secure the battery during reassembly.

  • Secure a new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.

  • During reassembly apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).

移除电池

请勿再次使用已变形或损坏的电池,否则存在安全隐患。 请更换新的电池。

如果在重新组装期间使用旧电池,则可以在重新组装期间重复使用现有的胶水来固定电池。

使用预切胶 或双面胶带固定新电池。 为了正确定位,将新胶带放在设备中旧胶带所在的位置,请勿直接粘在电池上。 将新电池用力按入到位。

重新组装期时,可能需要涂抹新的粘合剂。在涂抹新的粘合剂之前,请用酒精 (>90%) 清洁相关区域。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利