跳转到主内容

在MacBook Air 13''2013年中期上更换固态硬盘

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 2

步骤 2
MacBook Air 13" Mid 2013 Solid-State Drive Replacement: 步骤 0 中的图像 1,2 MacBook Air 13" Mid 2013 Solid-State Drive Replacement: 步骤 0 中的图像 2,2
  • Gently lift the end of the SSD about half an inch and pull it straight out of its socket on the logic board.

  • Don't lift the SSD more than half an inch—doing so may damage the SSD or its socket on the logic board.

  • When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

轻轻抬起SSD的半英寸左右的一端,并与主板平齐拉出来以卸下固态硬盘

不要抬起固态硬盘超过半英寸,否则可能损坏您的固态硬盘或主板上面的接口。

想要重新安装你的固态硬盘,请按照相反的步骤执行。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利