跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南

英语
中文

正翻译步骤 5

步骤 5
Tilt the battery back enough to access the battery cable connector.
  • Tilt the battery back enough to access the battery cable connector.

  • Pull the battery cable connector away from its socket on the logic board and remove the battery from the upper case.

  • If you're installing a new battery, you should calibrate it as soon as possible.

将电池重新倾斜到足以接触电池电缆接口。

将电池从逻辑板上倾斜到足以触碰电池电路。 将电池电路从逻辑板上的插座中拔出,然后从上盖取出电池。

如果你在安装新电池,你应该在安装完成后进行校准

在开源创作共享许可协议下,你的投稿已被许可