How to open the Huawei Watch GT 3 (46mm) for Repairs

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

How to open the Huawei Watch GT 3 (46mm) for Repairs, Pry up the rear panel: 步骤 0 中的图像 1，2

How to open the Huawei Watch GT 3 (46mm) for Repairs, Pry up the rear panel: 步骤 0 中的图像 2，2

Pry up the rear panel

Insert the edge of a spudger into the the loudspeaker opening at the bottom edge of your watch.
When prying up the back cover put a finger on top or the edge of it and hold it down. Too much force during the prying procedure may lead to popping off the back cover too quickly and tearing the rear panel assembly cable.
The plastic clamps holding the back cover in place sit very tight and may require some force during the prying procedure.
Use a spudger to pry up the rear panel of your Huawei watch GT 3.
Don't try to remove the back cover assembly all the way yet, it's still connected to the daughterboard.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。