iPhone SE 2022 Home键/Touch ID 传感器替换

英语

中文

指南的前提条件

只有所有的必备指南都已被翻译，此翻译才会被认为是完整的。

iPhone SE 2022 五角螺丝替换

三角撬片深度标记

如何拆开iPhone SE 2022以进行维修

如何断开 iPhone SE 2022 的电池连接

如何卸下 iPhone SE 2022屏幕组件

指南信息

= 完成 = 未完成

你要替换的哪一部分？

标题

简介

Use this guide to remove, transfer, or replace the home/touch ID sensor a.k.a the home button in an iPhone SE 2022.

This guide was performed on the ***A2783*** (international) model.

The iPhone SE 2022’s home “button” is actually a solid-state sensor, which also includes Touch ID (fingerprint recognition) capability.

***Most replacement home buttons won’t work***, so check carefully before starting your repair. Your iPhone’s original home button is uniquely paired to the logic board at the factory—and without Apple’s proprietary calibration process, even a genuine replacement home button from another iPhone won’t work. To fix a broken home button, you should install a specially-made, universal-style home button. Note that these replacements only work as a button and you'll loose Touch ID functionality.

If you are only replacing a broken screen, you can use this guide to carefully remove and transfer your working original home button to a new screen, preserving all functions, including Touch ID.

***Note:*** This guide instructs you to fully detach and remove the display assembly; this is highly recommended for easier handling and to prevent damage to the display cables. If you feel comfortable removing the Home/Touch ID Sensor while keeping the display cables attached, you can skip the steps for disconnecting the display.

If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection.

You’ll need replacement adhesive to reattach components when reassembling the device.

结论