iPhone SE 2022 Home键/Touch ID 传感器替换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

英语

中文

正翻译步骤 3

步骤 3

Disconnect the home/Touch ID sensor

Use an opening tool to pry under the left edge of the home/Touch ID sensor cable connector to disconnect it from its socket.
If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of a spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.