修复你的物品 社区 商店

15寸微软 Surface Laptop 3 电池更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

返回指南
英语
中文
上一步

正翻译步骤 8

步骤 8
Microsoft Surface Laptop 3 15" Battery Replacement, Remove the battery: 步骤 0 中的图像 1，3 Microsoft Surface Laptop 3 15" Battery Replacement, Remove the battery: 步骤 0 中的图像 2，3 Microsoft Surface Laptop 3 15" Battery Replacement, Remove the battery: 步骤 0 中的图像 3，3
Remove the battery

  • Use both plastic cards to lift the entire battery assembly up and away from the case.

  • If the battery still feels adhered to the case, reapply adhesive remover and use the plastic cards in problem areas to make sure all three cell groups are fully separated from the case.

  • Remove the battery.

  • During reassembly, double-check the fit and alignment of your new battery before sticking it down.

  • If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.

  • Carefully position the battery and set it into place. Press and hold each cell group firmly for 5–10 seconds to secure it to the lower case.

取出电池

使用两张塑料卡将整个电池组件向上提起并从外壳中取出。

如果感觉电池仍然粘在外壳上，请重新涂抹粘合剂去除剂并在问题区域使用塑料卡，以确保所有三个电池组都与外壳完全分离。

取出电池。

在重新组装期间，在将新电池粘住之前，请仔细检查新电池的安装和对齐情况。

如果你的电池底部预装了粘合剂，请将其翻转过来并小心地剥去衬里以露出粘合剂。如果你的电池没有附带粘合剂，请使用薄的双面胶带（例如 Tesa 61395）将电池固定到位。

小心放置电池并将其放置到位。牢牢按住每个电池组 5-10 秒，将其固定到下壳上。

[title] Remove the battery
[* black] Use both plastic cards to lift the entire battery assembly up and away from the case.
[* icon_note] If the battery still feels adhered to the case, reapply adhesive remover and use the plastic cards in problem areas to make sure all three cell groups are fully separated from the case.
[* black] Remove the battery.
[* icon_reminder] During reassembly, double-check the fit and alignment of your new battery before sticking it down.
[* black] If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to keep your battery in place.
- [* black] Carefully position the battery and set it into place. Press and hold each cell group firmly for 5-10 seconds to secure it to the lower case.
+ [* black] Carefully position the battery and set it into place. Press and hold each cell group firmly for 5–10 seconds to secure it to the lower case.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。