注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 5
步骤 5
-
Slide a plastic card underneath the far left battery cell group to slice through the adhesive holding it to the case.
-
Wiggle the card from side to side as you insert it under the battery cells to fully separate all adhesive holding them in place.
-
Leave the plastic card temporarily underneath the cell to prevent it from re-adhering while you continue.
[* icon_caution] Take care not to puncture or bend the battery with your tools—a punctured or bent battery may leak dangerous chemicals or cause a thermal event. | |
- | [* black] Slide a plastic card underneath the far left battery cell group to slice through the adhesive holding it to the case. |
+ | [* black] Slide a [product|IF145-101|plastic card] underneath the far left battery cell group to slice through the adhesive holding it to the case. |
[* icon_note] If you encounter significant resistance at any point during this procedure, pause and apply more adhesive remover. Wait for it to soak into the adhesive, and try again. | |
[* black] Wiggle the card from side to side as you insert it under the battery cells to fully separate all adhesive holding them in place. | |
[* black] Leave the plastic card temporarily underneath the cell to prevent it from re-adhering while you continue. |
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。