修复你的物品 社区 商店

微软15寸 Surface Laptop 3 上壳更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的23本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Microsoft Surface Laptop 3 15" Upper Case Replacement, Disconnect the ribbon cable: 步骤 0 中的图像 1，3 Microsoft Surface Laptop 3 15" Upper Case Replacement, Disconnect the ribbon cable: 步骤 0 中的图像 2，3 Microsoft Surface Laptop 3 15" Upper Case Replacement, Disconnect the ribbon cable: 步骤 0 中的图像 3，3
Disconnect the ribbon cable

  • The keyboard and touchpad ribbon cable is secured in place by a magnet connector.

  • On some models, this connector is surrounded by black tape.

  • Insert the flat end of a spudger underneath one edge of the ribbon cable connector, and pry up to release it.

  • Remove the ribbon cable from the motherboard.

断开带状电缆

键盘和触摸板带状电缆通过磁吸接口固定到位。

在某些型号上，此接口周围贴有黑色贴纸。

将撬棒的平端插入带状电缆接口的一个边缘下方，然后撬起以将其松开。

从主板上取下带状电缆。

[title] Disconnect the ribbon cable
[* icon_note] The keyboard and touchpad ribbon cable is secured in place by a magnet connector.
-[* icon_note] On some models, this connector is surrounded by a black sticker.
+[* icon_note] On some models, this connector is surrounded by black tape.
[* black] Insert the flat end of a spudger underneath one edge of the ribbon cable connector, and pry up to release it.
[* black] Remove the ribbon cable from the motherboard.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。