Motherboard Desoldering

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Motherboard Desoldering, Desolder the vibration motors: 步骤 0 中的图像 1，3

Motherboard Desoldering, Desolder the vibration motors: 步骤 0 中的图像 2，3

Motherboard Desoldering, Desolder the vibration motors: 步骤 0 中的图像 3，3

Desolder the vibration motors

The next few steps require desoldering and soldering connections. To learn how to solder, check out our soldering guide—if you've already soldered, you can still find some helpful tips and tricks in this guide!
Flip over the controller and motherboard.
Use a soldering iron to desolder the vibration motor wires from the motherboard:
Two red wires
Two black wires
During reassembly, remember to solder the wires back into the same position. The red wires belong closest to the edge and next to the Rs on the motherboard.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。