Nintendo Switch LCD屏幕拆解

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

英语

中文

正翻译步骤 2

步骤 2

Turn the screen assembly over.
Insert an opening pick in between the LCD panel and the digitizer at the top-left corner.
It doesn't matter how deep you insert the opening pick, but about 5 mm is enough to slice through all the adhesive.
You can slightly bend the digitizer to create a wider gap, but take care not to bend it too far to cause damage to the digitizer if you're reusing it.
Slide the opening pick along the top edge of the screen assembly to slice the adhesive.

将屏幕组件翻转过来。
在左上角的 LCD 面板和液晶前框之间插入一个三角撬片。
插入的深度无所谓，大约 5 毫米就足够分离粘合剂。
您可以稍微弯曲液晶屏幕以产生更多空间方便插入撬片，但请注意不要将其弯曲得太过，以免重新组装使用的时损坏液晶前框。
沿着屏幕组件的边缘滑动三角撬片以分离粘合剂。