Google Pixel 4a 屏幕置换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南。

英语

中文

正翻译步骤 6

步骤 6

The screen adhesive is very weak and you should not need to re-apply heat. If the screen does feel hard to slice, apply heat to the difficult area for one minute and try again.
Insert another opening pick into the right edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel.
Slide the opening pick around the bottom of the phone to cut the adhesive.
There is a delicate cable under the bottom-right corner of the screen. If you feel your opening pick snag on anything, pull it out and try again. Make sure your pick is angled downward and only inserted as little as is necessary to separate the adhesive (no more than 2 mm deep).
Leave the pick inserted along the bottom edge to prevent the adhesive from resealing.

	[* icon_note] The screen adhesive is very weak and you should not need to re-apply heat. If the screen does feel hard to slice, apply heat to the difficult area for one minute and try again.
	[* black] Insert another opening pick into the right edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel.
	[* black] Slide the opening pick around the bottom of the phone to cut the adhesive.
-	[* icon_caution] There is a delicate cable under the bottom-right corner of the screen. If you feel your opening pick snag on anything, pull it out and try again. Make sure your pick is angled downward and only inserted as little as is necessary to separate the adhesive (no more than 3 mm deep).
+	[* icon_caution] There is a delicate cable under the bottom-right corner of the screen. If you feel your opening pick snag on anything, pull it out and try again. Make sure your pick is angled downward and only inserted as little as is necessary to separate the adhesive (no more than 2 mm deep).
	[* black] Leave the pick inserted along the bottom edge to prevent the adhesive from resealing.