跳转到主内容

2016年末带Touch Bar的15寸 MacBook Pro 触控板组件更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 6

步骤 6
MacBook Pro 15" Touch Bar Late 2016 Trackpad Assembly Replacement: 步骤 0 中的图像 1,3 MacBook Pro 15" Touch Bar Late 2016 Trackpad Assembly Replacement: 步骤 0 中的图像 2,3 MacBook Pro 15" Touch Bar Late 2016 Trackpad Assembly Replacement: 步骤 0 中的图像 3,3
  • Swing the display open slightly, but keep the MacBook upside-down. The trackpad assembly should separate and lay flat on the display.

  • Gently feed the trackpad's ribbon cable through its slot in the chassis.

  • Carefully note the correct slot for the trackpad cable during reassembly—it goes through the narrow slot alongside the battery, not the bigger slot near the MacBook Pro's front edge.

将显示器略微打开,但保持 MacBook 倒置。触控板组件应分开并平放在显示屏上。

轻轻地将触控板的带状电缆穿过机箱中的插槽。

在重新组装时,请仔细注意触控板电缆的正确插槽 —— 它通过电池旁边的窄插槽,而不是靠近 MacBook Pro 前缘的较大插槽。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利