跳转到主内容

三星Galaxy S10及S10e拆解

英语
中文

正翻译步骤 8

步骤 8
Samsung Galaxy S10 and S10e Teardown: 步骤 0 中的图像 1,3 Samsung Galaxy S10 and S10e Teardown: 步骤 0 中的图像 2,3 Samsung Galaxy S10 and S10e Teardown: 步骤 0 中的图像 3,3
  • Next we pop the main camera array off the board—it comes encased in a yellow plastic frame, likely ABS or nylon in its natural, un-dyed color. (It looks a little 80's, but we don't mind.)

  • We plop both camera arrays down next to their respective selfie cams (by themselves at far left and far right).

  • The S10's array (left) gets one more camera than the S10e—a 12 MP, ƒ/2.4 telephoto with OIS—and sticks it on the same connector as the standard wide-angle camera.

  • Further physical teardown would get pretty destructive, but here's an X-ray showing the telephoto camera's sensor and OIS electromagnets.

  • The 12 MP wide-angle cameras also get OIS, as well as the trick dual-aperture setup from the S9+.

  • Finally, the 16 MP, ƒ/2.2 ultra wide modules have slightly thicker plastic frames.

  • This year's codename is "Beyond"—updated from last year's infinity "Star".

接下来将主摄组件从主板上拿出,其被黄色的塑料框架所包裹着,材质可能是ABS或是尼龙,未经上色,展现其材料原色(虽然有点80年代的气氛,但我们并不介意)

我们将两个相机组件分别放在其各自前置相机的旁边(最左同最右)

S10的组件(左)比S10e多了一颗12 MP ƒ/2.4的长焦相机,支持OIS光学防抖,同时与标准广角使用相同的排线

进一步物理性拆解将会是极具破坏性的,这里我们将会使用一张X光相片来展示这颗长焦镜头的传感器以及光学防抖器件

12 MP的广角相机同样支持光学防抖,同时继承着S9+的双光圈功能

最后,一颗16 MP ƒ/2.2的超广角相机,嵌套在一个稍厚的塑料框架内

今年的代号是“Beyond”,从去年的“Star”升级而来

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利