修复你的物品 社区 商店

JBL Charge 3 前部面板更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

返回指南
英语
中文
上一步

正翻译步骤 2

步骤 2
JBL Charge 3 Front Cover Replacement: 步骤 0 中的图像 1，1

  • Pull apart your cover gently from both sides and remove it from the speaker housing.

  • There are screws around the foot of the device that may need loosening to be able to unclip the other side of the cover.

  • The inside of the front cover has holes that must match with their corresponding pins on the speaker housing for proper reassembly.

  • Removing the Front Cover does not affect the waterproof seals of the device. However, removing any further disassembly of your speaker will require removing waterproof seals and gaskets. Your device may no longer be waterproof after these have been altered.

轻轻地从两侧拽开，并且从扬声器外壳移除。

前部面板的内部有为了重新组装而必须与在扬声器外壳的销对应的洞。

移除前部面板并不会影响设备的防水密封。然而，任何进一步的拆解都需要你移除防水密封和垫片。在这些被改动之后，你的设备可能不再防水。

[* black] Pull apart your cover gently from both sides and remove it from the speaker housing.
+[* icon_note] There are screws around the foot of the device that may need loosening to be able to unclip the other side of the cover.
[* icon_reminder] The inside of the front cover has holes that must match with their corresponding pins on the speaker housing for proper reassembly.
[* icon_caution] Removing the Front Cover does not affect the waterproof seals of the device. However, removing any further disassembly of your speaker will require removing waterproof seals and gaskets. Your device may no longer be waterproof after these have been altered.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。