跳转到主内容

Openingsprocedure

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
荷兰语

正翻译步骤 11

步骤 11
Opening Procedure: 步骤 0 中的图像 1,3 Opening Procedure: 步骤 0 中的图像 2,3 Opening Procedure: 步骤 0 中的图像 3,3
  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Don't insert your pick more than 3 mm, as you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

De bovenkant van het scherm is bevestigd met zowel lijm als klemmen.

Schuif je openingsplectrum langs de bovenste hoek van het scherm, terwijl je het scherm voorzichtig naar beneden loopt of trekt, in de richting van de Lightning-poort.

Als je te veel kracht gebruikt, zullen de klemmen breken. Wees voorzichtig en heb geduld.

Steek je plectrum ook hier niet dieper dan 3 mm in de opening om te voorkomen dat je de voorste sensormodule beschadigt.

Schuif je plectrum naar de tegenoverliggende bovenste hoek en snijd alle lijm daartussen door.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利