跳转到主内容

Procedimiento de apertura

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
西班牙语

正翻译步骤 11

步骤 11
Opening Procedure: 步骤 0 中的图像 1,3 Opening Procedure: 步骤 0 中的图像 2,3 Opening Procedure: 步骤 0 中的图像 3,3
  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Don't insert your pick more than 3 mm, as you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

El borde superior del la pantalla está sujeto con pegamento y clips.

Desliza la púa de apertura alrededor de la esquina superior de la pantalla, mientras tiras suavemente o mueve la pantalla hacia abajo en la dirección del puerto Lightning.

Los clips se romperán si tu usas demasiado fuerza, Trabaja con cuidado y sé paciente.

No insertes tu púa más de 3 mm, ya que puedes dañar el conjunto de sensores del panel frontal.

Desliza la púa hacia la esquina opuesta y corta cualquier adhesivo restante que sujeta la pantalla.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利