修复你的物品 社区 商店

Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南。

返回指南
英语
荷兰语
上一步 下一步

正翻译步骤 3

步骤 3
Nintendo Switch Headphone Jack and Game Card Reader Replacement: 步骤 0 中的图像 1，2 Nintendo Switch Headphone Jack and Game Card Reader Replacement: 步骤 0 中的图像 2，2

  • Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

  • If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

Gebruik de punt van je spudger om de aansluitingen van de hoofdtelefoonjack en de gamekaartlezer in een rechte beweging van het moederbord omhoog te duwen en los te koppelen.

[* black] Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.
+[* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.
+[* icon_note] If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。