Skip to main content
英语
中文

正翻译步骤 5

Step 5
Once the screen is warm to the touch, apply a suction cup  to the lower edge of the phone. If the phone's screen is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed. Lift on the suction cup, and insert a halberd spudger or an opening pick under the display assembly.
  • Once the screen is warm to the touch, apply a suction cup to the lower edge of the phone.

  • If the phone's screen is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift on the suction cup, and insert a halberd spudger or an opening pick under the display assembly.

  • Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

  • Start to slide the halberd spudger/opening pick along the lower edge of the phone to cut the adhesive. Leave an opening pick at the corner to prevent the adhesive from resealing.

  • The screen's flex cable is located just below the midpoint on the side of the power button, and may interfere with your cutting tool.

  • Continue to slide the halberd spudger/opening pick along the side of the phone and insert another opening pick.

一旦屏幕变热,请在手机的下边缘吸上一个吸盘。

如果手机屏幕破裂,吸盘可能会粘不住。尝试用强力胶带将其粘起,或将吸盘加到适当的位置并使其稳定,以便继续进行。

抬起吸盘,并在显示屏组件下方插入撬棒或三角撬片。

由于手机是曲面屏,你将向上推,而不是平行插入手机平面。

开始沿着手机的下边缘滑动撬棒或三角撬片以切割粘合剂。在拐角处留下一个三角撬片,以防止粘合剂重新密封。

屏幕的柔性电缆位于电源按钮侧面中点的正下方,可能会干扰你的切割工具。

继续沿手机侧面滑动撬棒或三角撬片,并插入另一个三角撬片。

在开源创作共享许可协议下,你的投稿已被许可