跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 5

Step 5
When the adhesive has been separated on all three sides properly you will be able to slowly lift the back cover. Don't force it open. Use an iOpener to again soften the adhesive if the back cover won't come off or starts to bend. Pay attention to the fingerprint sensor connector when flipping the back cover open. You might need to disconnect it as described in the next step.
  • When the adhesive has been separated on all three sides properly you will be able to slowly lift the back cover.

  • Don't force it open. Use an iOpener to again soften the adhesive if the back cover won't come off or starts to bend.

  • Pay attention to the fingerprint sensor connector when flipping the back cover open. You might need to disconnect it as described in the next step.

当三条边的胶水都被划开了以后,你就可以缓慢地打开背面玻璃了。

不要用太大力。如果背面玻璃无法被分开或是开始弯曲,用iOpener重新加热来软化胶水。

当你翻开背面玻璃时,当心指纹识别器的连接线。你可能需要把链接线分开,下一步有所说明。

在开源创作共享许可协议下,你的投稿已被许可