跳转到主内容

iPad 6 Wi-Fi Front Panel Assembly Replacement

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
中文

正翻译步骤 3

步骤 3
iPad 6 Wi-Fi Front Panel Assembly Replacement: 步骤 0 中的图像 1,3 iPad 6 Wi-Fi Front Panel Assembly Replacement: 步骤 0 中的图像 2,3 iPad 6 Wi-Fi Front Panel Assembly Replacement: 步骤 0 中的图像 3,3
  • Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

  • During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues.

在此插入翻译

在此插入翻译

在此插入翻译

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利