跳转到主内容

iPad 3 4G版 前面板的移除

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的153本指南

英语
中文

正翻译步骤 20

步骤 20
Removing iPad 3 4G Front Panel: 步骤 0 中的图像 1,3 Removing iPad 3 4G Front Panel: 步骤 0 中的图像 2,3 Removing iPad 3 4G Front Panel: 步骤 0 中的图像 3,3
  • Slide the opening pick along the left edge of the iPad, releasing the adhesive as you go. The adhesive is thin here due to the digitizer along the whole left side. Make sure the pick is not too deep (max 1/2 inch) 10 mm to prevent damaging the digitizer.

  • The digitizer cable is located approximately 2" (50 mm) from the bottom of the iPad. Stop sliding the pick when you get ~2.25" (60 mm) from the bottom of the iPad.

在此插入翻译

在此插入翻译

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利