跳转到主内容

plantronics Voyager pro Battery Replacement

你所需要的

视频概述

  1. plantronics Voyager pro Battery Replacement, Battery: 步骤 1 中的图像 1,1
    • order your battery

  2. plantronics Voyager pro Battery Replacement: 步骤 2 中的图像 1,1
    • separate rubber case from back of earpiece. you don't need to remove it completely like I did.

  3. plantronics Voyager pro Battery Replacement: 步骤 3 中的图像 1,1
    • rotate the back away from the case. its basically glued in place with no other fasteners

  4. plantronics Voyager pro Battery Replacement: 步骤 4 中的图像 1,1
    • you will need to slowly cut through the foam to separate the wires from the battery. then use a soldering iron to desolder the old battery from the board these connections go through the entire board.

  5. plantronics Voyager pro Battery Replacement: 步骤 5 中的图像 1,1
    • solder the new battery in and test the charging before reassembly.

    • the new battery I ordered was slightly larger but it fit with no problems. I found the wires inside this device to be fairly robust and did not have any issues with wires breaking or dislodging.

    • When I re-assembled I used small amounts of gorilla glue for both the case and the rubber cover. it worked very well and has worked well since. for more details I put together a short video you can check out.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Dan Dunham

于04/15/17注册

3,327 声望

创作了29篇指南

一条评论

I accomplished this battery replacement. I was successful. However in my opinion, this device was not meant to have this repair done. It is a “fiddley” affair, but possible. I think it took me two hours, at my leisure. Probably better off replacing the device. Unless…. your just that type who enjoys fiddling around.

Leslie Womelsdorff - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 20

过去 30 天: 69

总计 4,505