iPhone Pentalobe screws Replacement

简介

Use this guide to remove or replace the two screws securing the iPhone display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

If you need additional iPhone screws you can get those Apple iPhone Screws.

你所需要的

步骤 1 Remove the two Pentalobe screws

iPhone Pentalobe screws Replacement, Remove the two Pentalobe screws: 步骤 1 中的图像 1，2

iPhone Pentalobe screws Replacement, Remove the two Pentalobe screws: 步骤 1 中的图像 2，2

Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Power off your iPhone before beginning disassembly.
Remove the two 6.75 mm long pentalobe P2 screws at the bottom edge of the iPhone.
Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.