跳转到主内容

iPhone 8 Plus Display Assembly Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. iPhone 8 Plus Display Assembly Replacement, Display Assembly: 步骤 1 中的图像 1,2 iPhone 8 Plus Display Assembly Replacement, Display Assembly: 步骤 1 中的图像 2,2
    • Use the tip of a spudger or a fingernail to disconnect the large lower display connector by prying it straight up from its socket.

    • To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

  2. iPhone 8 Plus Display Assembly Replacement: 步骤 2 中的图像 1,2 iPhone 8 Plus Display Assembly Replacement: 步骤 2 中的图像 2,2
    • Disconnect the second lower display cable connector, directly behind the one you disconnected in the previous step.

  3. iPhone 8 Plus Display Assembly Replacement: 步骤 3 中的图像 1,2 iPhone 8 Plus Display Assembly Replacement: 步骤 3 中的图像 2,2
    • Remove the two tri-point Y000 screws securing the bracket over the front panel sensor assembly connector:

    • One 1.0 mm screw

    • One 1.2 mm screw

  4. iPhone 8 Plus Display Assembly Replacement: 步骤 4 中的图像 1,1
    • Remove the bracket covering the front panel sensor assembly connector.

  5. iPhone 8 Plus Display Assembly Replacement: 步骤 5 中的图像 1,2 iPhone 8 Plus Display Assembly Replacement: 步骤 5 中的图像 2,2
    • Use the tip of a spudger or a fingernail to disconnect the front panel sensor assembly connector from its socket.

  6. iPhone 8 Plus Display Assembly Replacement: 步骤 6 中的图像 1,1
结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Jeff Suovanen

于08/06/13注册

428,716 声望

创作了259篇指南

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了17,299篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 16

总计 4,354