跳转到主内容

iPod Nano 第二代外壳组件更换

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 4

步骤 4
iPod Nano 2nd Generation Case Assembly Replacement: 步骤 0 中的图像 1,1
  • Remove the following two screws:

  • One #00 Phillips screw with a large head near the headphone jack.

  • One #000 Phillips screw with a smaller head near the side of the iPod. This screw strips easily, so be sure to press down firmly on the screwdriver.

拆下以下的两颗螺丝:

一个 #00 十字螺丝,在耳机插孔附近

一颗 #000 十字螺丝,其头部较小,靠近 iPod 侧面。 这个螺丝很容易损坏(包括脱落,滑牙等),所以一定要用力压住螺丝刀。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利