修复你的物品 社区 商店

认识和断开线缆连接头

返回指南
英语
中文
上一步 下一步

正翻译步骤 5

步骤 5
Recognizing & Disconnecting Cable Connectors, Flat-Topped (Low Profile) Connectors: 步骤 0 中的图像 1，3 Recognizing & Disconnecting Cable Connectors, Flat-Topped (Low Profile) Connectors: 步骤 0 中的图像 2，3 Recognizing & Disconnecting Cable Connectors, Flat-Topped (Low Profile) Connectors: 步骤 0 中的图像 3，3
Flat-Topped (Low Profile) Connectors

  • Some connectors have a flat, plastic top that sits flush on top of their socket. Often, these connectors have multiple cables connected to them. Flat-topped connectors are usually on the larger side, and are typically used to connect batteries in laptops and larger gaming devices.

  • To disconnect the cable, use the flat end of a spudger to lift and unclip the outer edges of the connector. You may need to use your fingers to pull the connector completely out of its socket.

  • Sometimes, these connectors have a slide lock running across the top that holds the connector in place. If this is the case, push the lock away from the connector before trying to disconnect it.

  • Flat topped connectors can also have a metal locking bar that keeps the connector in place. Unclip and flip the locking bar up to disconnect it.

  • To reconnect the cable, carefully position the connector over its socket and press straight down—the connector should snap into place without much force. If you're having trouble, the connector is most likely misaligned. Reposition it and try again.

  • Don't try to force the connector into place or you may damage the delicate pins.

平顶（薄型）接口

若要断开像这样的平顶接口，使用撬棒来撬起每一侧。 然后从插座中径直提起就好。

若要重新连接，请小心将接口对准插座，然后将其直接按下直到其卡入其插座。只需要手指的压力即可。其在未对齐的情况下无法被插入插座中。有时，找到正确的位置需要多一点耐心。

[title] Flat-Topped (Low Profile) Connectors
-[* black] To disconnect flat connectors like this one, use a spudger to pry up each side. Then, lift the connector straight up from its socket.
-[* icon_reminder] To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.
+[* icon_note] Some connectors have a flat, plastic top that sits flush on top of their socket. Often, these connectors have multiple cables connected to them. Flat-topped connectors are usually on the larger side, and are typically used to connect batteries in laptops and larger gaming devices.
+[* black] To disconnect the cable, use the flat end of a spudger to lift and unclip the outer edges of the connector. You may need to use your fingers to pull the connector completely out of its socket.
+ [* icon_note] Sometimes, these connectors have a slide lock running across the top that holds the connector in place. If this is the case, [link|https://guide-images.cdn.ifixit.com/igi/jQW5Ksl6jsM5MwFV.full|push the lock away from the connector|new_window=true] before trying to disconnect it.
+ [* icon_note] Flat topped connectors can also have a metal locking bar that keeps the connector in place. [link|https://assets.cdn.ifixit.com/static/ezgif-1-f03ee5facb.gif?1718299863|Unclip and flip the locking bar up|new_window=true] to disconnect it.
+[* icon_reminder] To reconnect the cable, carefully position the connector over its socket and press straight down—the connector should snap into place without much force. If you're having trouble, the connector is most likely misaligned. Reposition it and try again.
+ [* icon_caution] Don't try to force the connector into place or you may damage the delicate pins.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。