注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。
正翻译步骤 1
步骤 1
-
Flip the device over, so the backside is facing up.
-
Use a Phillips #00 screwdriver to remove four 4.00 mm screws.
-
Use the Phillips #00 screwdriver to unscrew or loosen two captive screws at the right and left corner near the hinges.
-
Three of the screws are dummy screws, only screwed into retainers. They are not holding anything in and can be left in place for simplicity.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。