Opening Procedure

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

英语

中文

正翻译步骤 5

步骤 5

Disconnect the sensor assembly cable

Use a spudger to disconnect the sensor assembly cable by prying the connector straight up from its socket.
To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.