Canon PowerShot SX60 HS Back Panel Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南。

英语

中文

上一步

正翻译步骤 4

步骤 4

Ensure the LCD screen is swung fully to the left before taking off the back panel.
Use the iFixit opening tool to pry off the back panel.
Don't completely pull off the back panel because there is still a ribbon attached.
Use the black spudger to unclip the ribbon located behind the battery compartment. Then remove it using the nylon tipped tweezers.
Once the ribbon is unplugged, remove the back panel from the camera body.