注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 1
步骤 1
-
Using a Phillips #0 screwdriver, unscrew the two 8mm screws from the panel.
-
Take a spudger and wedge it between the panel and the base of the device.
-
Push down on the spudger until you hear a click sound.
-
Slide the spudger along the panel and continue to push down until the panel is completely detached.
-
Remove the panel.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。