跳到步骤＃11
由 oldturkey03 — 编辑
编辑已通过 由 oldturkey03
- 之前
- 之后
- 不变
步骤行
| + | [* black] Battery removed from the PCB and the solder pads on the PCB are now clearly visible |
|---|---|
| + | [* black] In an attempt to determine the type off battery the red plastic covering was removed. The battery is a 3.7V lithium-ion battery that measures approximately (rounded) 14mmX49mm. Roughly the size of a AA battery. measure |
| + | [* icon_note] The groove on the battery is always on the positive end of the battery. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加