跳到步骤#9
由 mayer — 编辑
编辑已通过 由 Sam Goldheart
- 之前
- 之后
- 不变
步骤行
[* black] Remove the following four screws: | |
- | [* red] Two 3.5 mm Phillips screws |
+ | [* red] Two 3.5 mm Phillips screws these are T5 screws on the Early 2011 |
[* orange] Two 1.6 mm Phillips screws | |
[* black] Remove both connector shields from the logic board. |