跳到步骤＃5
由 Arthur Shi — 编辑
编辑已通过 由 Arthur Shi
- 之前
- 之后
- 不变
步骤行
| - | [* black] Like the previous S20 Ultra, the entire camera bump can be removed and replaced, connected only to the rear panel with a thin adhesive gasket and a small lip to rest on. |
|---|---|
| - | [* icon_note] Contrary to the rear panel, the camera bump is made of metal, so it won't crack or shatter if you drop it. The lenses themselves are glass, however, but those can be individually replaced. |
| + | [* black] Like the previous S20 Ultra, the camera bump grips onto the rear panel with a thin adhesive gasket lip. It can be replaced independently from the rear panel. |
| + | [* icon_note] You can also theoretically replace the rear panel without budging the camera bump. |
| + | [* icon_note] Unlike the previous S20 Ultra, the glass camera lenses can be individually replaced. |
| [* black] Even though this phone is humongous, our tiny [product|IF145-474-1|Minnow Driver Kit] still gets the job done. Proving that it's not the size of the toolkit that matters, but how you use it. | |
| [* black] Interals vs [link|https://d3nevzfk7ii3be.cloudfront.net/igi/QcERlBwo2m1ir2rF.full|the S20 internals] | |
| [* black] The earpiece [link out to photo 74 or replace the camera bump photo with photo 75] comes out with the antenna assembly / upper shield, as opposed to it being adhesive-d to the frame in the S20U |