跳到步骤＃2
由 Arthur Shi — 编辑
编辑已通过 由 Arthur Shi
- 之前
- 之后
- 不变
步骤行
| - | [* icon_note] There's a little bit of adhesive under the loudspeaker. It's possible to remove the loudspeaker without heating the adhesive but |
|---|---|
| - | [* black] |
| + | [* icon_note] There's a little bit of adhesive under the loudspeaker. It's possible to remove the loudspeaker without heating the adhesive but if you're having a hard time removing it, you can [guide|11677|use an iOpener] to soften the adhesive. |
| + | [* black] Slide the flat end of a spudger under the right side of the loudspeaker unit. |
| [* black] Pry up the loudspeaker unit until you can get a good grip. | |
| [* black] Remove the loudspeaker unit. |