跳到步骤＃8
由 Kane Chauhan — 编辑
编辑已通过 由 Arthur Shi
- 之前
- 之后
- 不变
步骤行
| [* black] To remove the Ribbon connectors that have a locking mechanism, identify the flap on the ribbon connector. Use either needle nose tweezers, or a plastic wedge to flip the small flap to the "up" position. | |
| [* black] Once the flap is up, use the plastic spudger to pull the ribbon connector out of the connection using the hole in the center of the ribbon. | |
| - | [* |
| + | [* icon_note] Now is a good time to remove the small backup battery from the motherboard. |