跳转到主内容

介绍历史: Samsung Galaxy S21 Ultra Charging Board Replacement

Dominik Schnabelrauch编辑

编辑已通过 由 Dominik Schnabelrauch

之前
之后
不变
设备
Samsung Galaxy S21 Ultra
Type
replacement
Thing
Charging Board
Title
Samsung Galaxy S21 Ultra Charging Board Replacement
Introduction
Use this guide to replace the charging board on your Samsung Galaxy S21 Ultra.
This guide was performed on the ***SM-G998B/DS*** (international) model. Other models have an additional antenna cable sitting in the edge of the midframe.
If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection.
You’ll need replacement adhesive to reattach components when reassembling the device.
Time Required Min
35分钟
Time Required Max
50分钟
Imageid
之前
之后
Difficulty
Moderate
Conclusion
If possible, turn on your device and test your repair before installing new adhesive and resealing.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
***To reassemble your device, follow these instructions in reverse order.***
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S21%20Plus|Answers community] for help.
Author
Public

指南的前提条件

工具

  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Heat Gun x1 added.
  • Isopropyl Alcohol (90% or Greater) x1 added.
  • Microfiber Cleaning Cloths x1 added.
  • ESD Safe Blunt Nose Tweezers x1 added.
  • Spudger x1 added.
  • Phillips #00 Screwdriver x1 added.
  • SIM Card Eject Tool x1 added.

配件

  • Tesa 61395 Tape x1 added.
  • iFixit Adhesive Remover x1 added.

标志

  • In Progress added.

步骤

步骤 1
之前
之后