修复你的物品 社区 商店

bObi Robotic Vacuum Power Switch Replacement

简介

For help closing bObi when the repair is complete, see Closing bObi's Cover Post-Repair

你所需要的

  1. bObi Robotic Vacuum Power Switch Replacement, Top Cover: 步骤 1 中的图像 1，2 bObi Robotic Vacuum Power Switch Replacement, Top Cover: 步骤 1 中的图像 2，2

    • Remove bObi’s front wheel to access one of the screws holding bObi together.

    • Make sure the wheel is turned closer to bObi's front touch sensors. Use your screwdriver for leverage, and the wheel will pop up and out.

    • Uninstall the larger screw that sits deeper in the wheel compartment.

    编辑

  2. bObi Robotic Vacuum Power Switch Replacement: 步骤 2 中的图像 1，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 2 中的图像 2，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 2 中的图像 3，3

    • Remove bObi's dustbin.

    • Uninstall the 2 screws close to the bin and 2 smaller screws above her main brushes.

    编辑

  4. bObi Robotic Vacuum Power Switch Replacement: 步骤 3 中的图像 1，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 3 中的图像 2，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 3 中的图像 3，3

    • Lift the brush holder. To detach completely, unplug it from bObi.

    • Remove the two screws on the dustbin contact point holder inside bObi.

    • There are 4 screws beneath the main brushes. Uninstall these, and open bObi up to expose her main circuit board.

    编辑

  5. bObi Robotic Vacuum Power Switch Replacement: 步骤 4 中的图像 1，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 4 中的图像 2，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 4 中的图像 3，3

    • Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed.

    编辑

  6. bObi Robotic Vacuum Power Switch Replacement, Power Switch: 步骤 5 中的图像 1，3 bObi Robotic Vacuum Power Switch Replacement, Power Switch: 步骤 5 中的图像 2，3 bObi Robotic Vacuum Power Switch Replacement, Power Switch: 步骤 5 中的图像 3，3

    • Slide the power switch up and out of its holder.

    • Unplug its wires from the main board.

    编辑

  7. bObi Robotic Vacuum Power Switch Replacement: 步骤 6 中的图像 1，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 6 中的图像 2，3 bObi Robotic Vacuum Power Switch Replacement: 步骤 6 中的图像 3，3

    • Slide the new power switch into the holders on bObi.

    • Plug it in to the main board and begin closing bObi up. For steps on how to close bObi, see Closing bObi's Cover Post-Repair

    编辑
结论

To reassemble your device, follow the guide on closing bObi Closing bObi's Cover Post-Repair

作者

与2其他贡献者

Chelsea

于09/24/14注册

2,278 声望

创作了31篇指南

徽章: 11

+ 8更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 9

总计 291