修复你的物品 社区 商店

Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement

简介

Are you going to throw away your expensive massage pillow just because the heater is broken? Here is a simple guide to replace your broken heater so that your massage pillow can work again.

你所需要的

  1. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement, Heater: 步骤 1 中的图像 1，2 Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement, Heater: 步骤 1 中的图像 2，2

    • Disconnect the power plug located on the back of the massage pillow.

    • Please do this step carefully in order to avoid electric shock.

    编辑

  2. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 2 中的图像 1，2 Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 2 中的图像 2，2

    • Unzip the cover. You can locate the zipper at the back of the massage pillow.

    • Take out the pillow so that you can manage the heater completely.

    编辑

  3. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 3 中的图像 1，1

    • Use a Phillips JIS #1 screwdriver to remove the screw at the center of the heater.

    • The screw is 8.0mm.

    编辑

  5. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 4 中的图像 1，2 Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 4 中的图像 2，2

    • Remove the entire heater from the pillow.

    • You can see a green circuit board after removing the heater.

    编辑

  6. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 5 中的图像 1，1

    • Using the Phillips JIS #1 screwdriver, remove the three screws circled in the picture.

    • All three screws are 8.0mm, which are the same size as the previous one. They are interchangeable.

    编辑

  7. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 6 中的图像 1，1

    • Now you can take out the circuit board. There will be two wires attached to the circuit board.

    • If you prefer, you can clean the circuit board gently with dry tissues to remove the sticky lubricant.

    编辑

  8. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 7 中的图像 1，1

    • Use the pry bar to separate the wire from the white main board.

    • Before prying, check if you removed the power plug from the outlet and the massage pillow.

    编辑

  9. Zyllion ZMA-13-BK Shiatsu Massage Pillow Heater Replacement: 步骤 8 中的图像 1，1

    • Using your soldering station, remove the wires from the circuit board.

    • If you don't know how to solder, you can check out this guide: How To Solder and Desolder Connections

    • Soldering can be dangerous. Be cautious of high heat soldering tools.

    • Now, you can separate the circuit board completely to replace with a new heater.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Yuchen Li

于09/28/15注册

125 声望

撰写一个指南

徽章: 4

+1个徽章

团队

Cal Poly, Team 14-2, Green Fall 2015 Cal Poly, Team 14-2, Green Fall 2015 的会员

CPSU-GREEN-F15S14G2

4 名成员

创作了8篇指南

2条评论

Hi YuChen, nice work! Do you know from where I can find the switch for this heater? If you can tell me the part number, I can try looking it up on eBay. Thanks!

Abhishek Srivastava - 回复

YuChen, by any chance do you know where I can get the whole covering of this Shiatsu Massage Pillow. The fabric of mine has deteriorated and torn off. I have been trying to find one using Google search but was unable to find. Can you help, Thank you

gamesake2 - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 16

过去 30 天： 46

总计 5,973