修复你的物品 社区 商店

Zeki Droid Tablet Battery Replacement

简介

This guide will help you to disassemble your tablet and replace your battery. This procedure should take no more then forty minutes to complete. The process will include using a soldering tool and sharp objects.

你所需要的

  1. Zeki Droid Tablet Battery Replacement, Back Casing: 步骤 1 中的图像 1，1

    • Remove the back casing by slowly popping each tab out with a plastic opening tool.

    编辑

  2. Zeki Droid Tablet Battery Replacement: 步骤 2 中的图像 1，1

    • Remove the tapes one by one from the connecting wires with tweezers.

    编辑

  3. Zeki Droid Tablet Battery Replacement: 步骤 3 中的图像 1，1

    • Remove the black clips from both sides of the casing with a plastic opening tool.

    • The clips should pop off separate from the speakers.

    编辑

  5. Zeki Droid Tablet Battery Replacement: 步骤 4 中的图像 1，1

    • Remove the speakers from the back casing.

    • Do not tug on the speakers because they are connected to fragile wires.

    编辑

  6. Zeki Droid Tablet Battery Replacement: 步骤 5 中的图像 1，1

    • Pull the speakers away from the back casing carefullly.

    编辑

  7. Zeki Droid Tablet Battery Replacement, Battery: 步骤 6 中的图像 1，1

    • To remove the battery use an iFixit opening tool to pry the battery apart from the sticky glue.

    • Do not bend the battery.

    编辑

  8. Zeki Droid Tablet Battery Replacement: 步骤 7 中的图像 1，1

    • To completely disconnect the battery, locate the two metal tabs connected to the small circuit board.

    • Using a soldering tool, you will desolder the tabs from the circuit board.

    • Please refer to the 如何焊接和拆焊

    • If your replacement battery already has the small circuit board attached, you can desolder the red and black wires connected to the mother board instead of the metal tabs.

    编辑

  9. Zeki Droid Tablet Battery Replacement: 步骤 8 中的图像 1，1

    • To insert the new battery, you will need to solder the two new metal tabs back onto the small circuit board.

    • Please refer to 如何焊接和拆焊

    • If you have the battery with the circuit board connected, then you can solder the red and black wires back to the mother board.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Kyla

于03/11/15注册

156 声望

创作了2篇指南

徽章: 7

+ 4更多徽章

团队

Colorado Springs, Team 2-6, Panko Spring 2015 Colorado Springs, Team 2-6, Panko Spring 2015 的会员

UCCS-PANKO-S15S2G6

3 名成员

创作了10篇指南

3条评论

will this be the same for a tbqc 1065b?

mark campbell - 回复

how do i replace the screen mine has cracks?

mark campbell - 回复

This was my daughter's ...but the yeIIow pack the battery in is BLOWN TIGHT BULGING LIKE A BALLOON. DO I dare try to pry it off...not sure if it will exoIode. Yikes!!! She was murdered so I want to save it

CIaudia Bringe - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 8

总计 5,460