修复你的物品 社区 商店

ZTE Max XL Motherboard Replacement

简介

This guide has step-by-step instructions on how to replace your ZTE Max XL motherboard. You might need to replace your motherboard if you notice some hardware functions of the device start to misbehave. These hardware functions include charging port, headphone jack, Wi-Fi, Bluetooth, or GPS.

你所需要的

  1. ZTE Max XL Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，2 ZTE Max XL Motherboard Replacement, Motherboard: 步骤 1 中的图像 2，2

    • Before any disassembly, make sure the phone is powered off.

    • Use the SIM Card Eject Tool to remove the SIM card tray. To do this, insert the key into the hole on the side of the phone near the SIM card tray.

    编辑

  2. ZTE Max XL Motherboard Replacement: 步骤 2 中的图像 1，1

    • Apply the iOpener to the back of the phone. For instructions on how to use the iOpener, use this guide.

    • On our phone there was adhesive on the top and bottom of the phone backing, so we specifically heated these areas.

    • Do not heat the phone too much in one area - it may warp the plastic backing.

    编辑

  3. ZTE Max XL Motherboard Replacement: 步骤 3 中的图像 1，3 ZTE Max XL Motherboard Replacement: 步骤 3 中的图像 2，3 ZTE Max XL Motherboard Replacement: 步骤 3 中的图像 3，3

    • Starting at one corner, wedge a plastic opening pick or tool underneath the plastic backing to start undoing the tabs that connect the backing to the phone.

    • There are 3 tabs on top and bottom and 6 on each side.

    编辑

  4. ZTE Max XL Motherboard Replacement: 步骤 4 中的图像 1，2 ZTE Max XL Motherboard Replacement: 步骤 4 中的图像 2，2

    • Remove the two 3.4 mm JIS #00 screws that hold the cable in place—one may be under a lock sticker.

    编辑

  6. ZTE Max XL Motherboard Replacement: 步骤 5 中的图像 1，1

    • Use a nylon spudger to lift the press-fit connector and free the ribbon cable from the main part of the phone.

    编辑

  7. ZTE Max XL Motherboard Replacement: 步骤 6 中的图像 1，1

    • Remove all nineteen 3.4 mm JIS #00 screws from the perimeter of the back.

    编辑

  8. ZTE Max XL Motherboard Replacement: 步骤 7 中的图像 1，1

    • Use an opening tool between the screen and side trim battery cover to remove the screen.

    编辑

  9. ZTE Max XL Motherboard Replacement: 步骤 8 中的图像 1，2 ZTE Max XL Motherboard Replacement: 步骤 8 中的图像 2，2

    • Use a nylon spudger to carefully lift the 6 press-fit connections free from the motherboard.

    编辑

  10. ZTE Max XL Motherboard Replacement: 步骤 9 中的图像 1，2 ZTE Max XL Motherboard Replacement: 步骤 9 中的图像 2，2

    • Use the Spudger to carefully flip the metal clip holding the camera in place, located on the backside of the Motherboard.

    编辑

  11. ZTE Max XL Motherboard Replacement: 步骤 10 中的图像 1，1

    • With the motherboard removed, you can now insert the new motherboard or replace other parts within your phone.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Juan Espejo

于03/30/22注册

211 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

IUPUI, Team 1-2, Harley Spring 2022 IUPUI, Team 1-2, Harley Spring 2022 的会员

IUPUI-HARLEY-S22S1G2

4 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 7

总计 124