Turtle Beach Recon 70P Motherboard Replacement

简介

The motherboard is the central component of your headset that ensures that the device is functioning. Any problems with the motherboard may cause the headset to stop working in its entirety, therefore, in any case that your motherboard has suffered any damage, this guide will take you step by step on how to replace it and get your gaming headset working again.

你所需要的

步骤 1 Motherboard

Turtle Beach Recon 70P Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，3

Turtle Beach Recon 70P Motherboard Replacement, Motherboard: 步骤 1 中的图像 2，3

Turtle Beach Recon 70P Motherboard Replacement, Motherboard: 步骤 1 中的图像 3，3

Remove the left ear pad by following the steps from the ear pad replacement guide.
Use a spudger to pry up and remove the black plastic cover.

翻译

步骤 2

Turtle Beach Recon 70P Motherboard Replacement: 步骤 2 中的图像 3，3

Use a Phillips screwdriver to remove the two 5 mm screws that secure the motherboard.

翻译

步骤 3

Turtle Beach Recon 70P Motherboard Replacement: 步骤 3 中的图像 3，3

You may need to move the speaker so it does not block the path of the motherboard.
Remove the motherboard from the headset by up and away from the volume wheel.
Take care not to strain the connections.

翻译

步骤 4

Before replacing the motherboard, use flush cutters to cut each wire connected to the motherboard.
Cut the wires as close as possible to their connections.
Take note of how each component connects to the motherboard.

翻译

步骤 5

Prepare your replacement motherboard before continuing.
Solder each wire of the new motherboard in the same spots they were originally found.
Soldering irons can cause burns, fires and device damage. Always solder in a well-ventilated area.