修复你的物品 社区 商店

Toshiba Tecra M2 CPU Replacement

你所需要的

  1. Toshiba Tecra M2 CPU Replacement, Battery: 步骤 1 中的图像 1，1

    • Flip the laptop upside down so the back compartment is facing up.

    • Place left thumb on the battery lock tab.

    • Place right thumb on the battery release latch.

    编辑

  2. Toshiba Tecra M2 CPU Replacement: 步骤 2 中的图像 1，2 Toshiba Tecra M2 CPU Replacement: 步骤 2 中的图像 2，2

    • Slide both tabs outward at the same time to release battery pack.

    编辑

  3. Toshiba Tecra M2 CPU Replacement: 步骤 3 中的图像 1，1

    • Pull out the battery after it has popped out and set aside.

    • The battery and the battery cover are in one piece

    编辑

  4. Toshiba Tecra M2 CPU Replacement, CPU: 步骤 4 中的图像 1，1

    • Use a #00 phillips head screwdriver to remove the 8mm screw for the keyboard strip located under the battery.

    编辑

  5. Toshiba Tecra M2 CPU Replacement: 步骤 5 中的图像 1，1

    • Turn the device over and open it up to the display.

    • Gently lift a corner of the keyboard strip until it pops out of its position.

    编辑

  6. Toshiba Tecra M2 CPU Replacement: 步骤 6 中的图像 1，1

    • Using a #00 phillips head screwdriver, remove the two 4mm screws found underneath the keyboard strip.

    编辑

  8. Toshiba Tecra M2 CPU Replacement: 步骤 7 中的图像 1，2 Toshiba Tecra M2 CPU Replacement: 步骤 7 中的图像 2，2

    • Pop the keyboard up gently and rest on top of the touch pad

    • The keyboard is attached underneath by a thin film. Do not rip the keyboard off. Gently lay it down without ripping the film.

    编辑

  9. Toshiba Tecra M2 CPU Replacement: 步骤 8 中的图像 1，2 Toshiba Tecra M2 CPU Replacement: 步骤 8 中的图像 2，2

    • Using a #00 phillips head screwdriver, remove the 6mm screw holding the metal plate down.

    编辑

  10. Toshiba Tecra M2 CPU Replacement: 步骤 9 中的图像 1，2 Toshiba Tecra M2 CPU Replacement: 步骤 9 中的图像 2，2

    • Gently remove the keyboard connector film from the motherboard with fingers by lifting upwards.

    • Set aside the keyboard.

    编辑

  11. Toshiba Tecra M2 CPU Replacement: 步骤 10 中的图像 1，1

    • Using a #00 phillips head screwdriver, remove the three 13mm screws holding down the touch pad's frame from underneath the keyboard.

    编辑

  12. Toshiba Tecra M2 CPU Replacement: 步骤 11 中的图像 1，3 Toshiba Tecra M2 CPU Replacement: 步骤 11 中的图像 2，3 Toshiba Tecra M2 CPU Replacement: 步骤 11 中的图像 3，3

    • Flip laptop back upside down.

    • Remove the 5mm lock screw, using a #00 phillips head screwdriver.

    • Slide bay latch toward the battery compartment.

    • Remove CD-RW/DVD-ROM drive.

    编辑

  13. Toshiba Tecra M2 CPU Replacement: 步骤 12 中的图像 1，1

    • Remove the 4.5mm screw located under the CD-RW/DVD-ROM drive compartment, using a #00 phillips head screwdriver.

    编辑

  14. Toshiba Tecra M2 CPU Replacement: 步骤 13 中的图像 1，1

    • Remove the three 17mm screws found on the backside of the laptop using a #00 phillips head screwdriver.

    • Remove the ten 8mm screws using a #00 phillips head screwdriver.

    编辑

  15. Toshiba Tecra M2 CPU Replacement: 步骤 14 中的图像 1，2 Toshiba Tecra M2 CPU Replacement: 步骤 14 中的图像 2，2

    • Flip the laptop back over and unplug the touch pad's power cord from the motherboard gently using a pair of tweezers.

    编辑

  16. Toshiba Tecra M2 CPU Replacement: 步骤 15 中的图像 1，2 Toshiba Tecra M2 CPU Replacement: 步骤 15 中的图像 2，2

    • Lift off the plastic cover and set it aside.

    编辑

  17. Toshiba Tecra M2 CPU Replacement: 步骤 16 中的图像 1，2 Toshiba Tecra M2 CPU Replacement: 步骤 16 中的图像 2，2

    • Using a #00 phillips head screwdriver, unscrew the three 5mm screws holding down the heat sink securing bracket.

    • Lift off the securing bracket and set aside.

    编辑

  18. Toshiba Tecra M2 CPU Replacement: 步骤 17 中的图像 1，1

    • Wiggle the heat sink until it lifts off the top of your CPU. There is thermal paste underneath and it may stick.

    编辑

  19. Toshiba Tecra M2 CPU Replacement: 步骤 18 中的图像 1，3 Toshiba Tecra M2 CPU Replacement: 步骤 18 中的图像 2，3 Toshiba Tecra M2 CPU Replacement: 步骤 18 中的图像 3，3

    • Turn a flathead #3 screwdriver counter-clockwise to unlock the CPU socket.

    • Grab the CPU with your index finger and thumb and pull directly upwards.

    • Apply a new coat of thermal paste before reassembling.

    • 如何涂散热膏

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Cindy Nguyen

于09/08/14注册

386 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

CSU Fullerton, Team 1-6, Bruce Fall 2014 CSU Fullerton, Team 1-6, Bruce Fall 2014 的会员

CSUF-BRUCE-F14S1G6

3 名成员

创作了9篇指南

一条评论

"Step 4 - CPU" THAT IS NOT A 8MM SCREW! THERE IS NOW A HOLE IN MY COMPUTER!!

[deleted] - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 8

总计 1,599