简介

You don’t need a sewing machine to sew. But a machine can save you a lot of time when you make repairs, so if you have access to a sewing machine, here’s how to thread it. In this guide we’re using a Bernina 830, but the process will be similar for most sewing machines. Refer to your sewing machine’s owner’s manual for specific directions on how to thread the machine.

工具

配件

无需配件。

  1. Place a spool on the pin. Pull the thread from the spool straight out, following the length of the machine.
    • Place a spool on the pin. Pull the thread from the spool straight out, following the length of the machine.

    • Hook the thread under the eyelet on the outer edge of the machine.

    • With one hand, hold the spool steady. Using the eyelet as a pivot, pull the string perpendicular with the other hand. Lay the thread into the slot, which bisects the top of the machine.

    添加评论

  2. Pull the thread all the way across the slot on the top of the sewing machine. Then, pull the thread down toward the presser foot.
    • Pull the thread all the way across the slot on the top of the sewing machine. Then, pull the thread down toward the presser foot.

    • There is a lever just above the presser foot. Hook the thread under the lever until it rests in the crux.

    • Pull the thread back up toward the top of the machine.

    添加评论

    • At the top of the machine, lead the thread along the groove of the take-up lever.

    • Once you've fed the thread into the crux of the take-up lever, pull the thread back down towards the presser foot.

    • If you've threaded correctly, your thread should form a complete zigzag—first down, then up, then back down all the way to the presser foot.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Hook the thread behind the small, bent arm where the needle attaches to the machine.

    • Guide the thread, from front to back, through the eye of the needle, leaving a loose end of approximately 10 cm.

      • If the end of your thread has frayed and you cannot guide it through the eye of the needle, snip off the frayed end and try again.

    添加评论

    • After you've guided the thread through the eye of the needle, pull the thread down and through the large groove in the presser foot.

    • Hook the thread along the groove and pull it perpendicular toward the body of the machine.

    添加评论

    • While continuing to hold the top thread advance the sewing machine with the balance wheel (also know as the hand wheel), to pick up the bobbin thread.

    • Only turn the balance wheel in the direction that advances the machine. Usually, this means turning the wheel towards you. Turning the wheel in the opposite direction can ruin the tension on the sewing machine, causing it to jam. See your sewing machine manual for instructions specific to your machine.

    • Grasp these two threads between pinched fingers and pull them in unison toward the body of the machine, leaving two to three inch tails.

    添加评论

    • Slide the sewing machine table onto the machine.

    • Hold the sewing machine table so that is lays flush with the sewing machine.

    添加评论

    • Lock the sewing machine table into place by pushing the clamp lever to the right until it engages.

    添加评论

终点

7等其他人完成本指南。

Brittany McCrigler

于2012年03月05日注册

80,121 信誉积分

创作了132篇指南

团队

iFixit iFixit 的会员

Community

111 名成员

创作了7,319篇指南

Sewing machine comparison and reviews

Detailed and straight to the point comparison and product reviews of sewing machines. Insights on features, performance and best buying practices.

https://www.comparencart.com

cart - 回复

Sewing machine reviews

Best Sewing Review is here to help you what you need to know about in sewing . Check here https://bestsewingreview.com

Daisy - 回复

A good site to get knowledge about the <a href="http://www.buysewingmachineguide.com/"> sewing machine. </a>

sewing machne - 回复

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 41

过去的30天: 140

总计 4,722